Protective Spray Lacquer for Glow in the Dark and Fluorescent Paints Standard
The Lacquer 1K "NextGlow K300" spray is the right protection for our luminous paints. Thanks to its excellent properties, it is able to protect, smooth down and polish special varnishes such as glow in the dark (even known as photoluminescent or luminous paints) and fluorescent paints.
After the application of some coats of Lacquer, a protective film is formed, so the surface appears polished and uniform and IT DOES NOT FILTER UV RAYS: remember that the complete crossing of UV rays, is essential for the correct working of the luminous and fluorescent paints.
The exclusive chemical physical properties of this spray lacquer make the surfaces resistant to petrol, hydrocarbons, alcohol and detergents (even the strongest detergents). It has a perfect resistance to the scratch, it doesn't get yellow and it isn't deteriorated by UV rays. It's ideal for indoor and outdoor use.
The coverage of a spray can is about 1-1.5 mq. Spray paint realized with propellent without CFC.
INSTRUCTION FOR USE: Shake well for some minutes. Spray paint temperature must be 20°/25°C. Spray the product on the surface to be painted in an uniform and crossed way at about 15-20 cm distance. To prevent dripping, apply the product in thin coats, with repeated passages in time (about 15-20 minutes). Apply the lacquer on the luminous paint when it isn't too much dry ( 30 min. - 1 hour). If you prefer a perfect application, you can use thehandle Magnum which lets spread the paint with more precision.
TO REMOVE THE PAINT USE ACETONE AND/OR NITRO THINNER.
Product code: NEXTGLOW-K300
Cat: GLOW IN THE DARK Paints Photoluminescents Spray and brush
4.5 - 51 reviews
Apr 19, 2014
P&B sas - EMPOLI (FI) - Tel. (+39) 0571.530262 Fax (+39) 0571.534056 - P.IVA IT 12908320158